www.quartermile.ws Forum

TUNING GUIDE - Main => Kvacila - Lamele => Topic started by: Fiat Group on June 11, 2005, 02:55:47 AM

Title: SINTER.SI
Post by: Fiat Group on June 11, 2005, 02:55:47 AM

(http://www.sinter.si/images/home.gif) (http://www.sinter.si/)

Title: SINTER.SI
Post by: Zeljko on June 22, 2005, 07:39:15 PM

Sinter lamele vec od 100e
Karbonske kocione plocice vec od 40e

Slike uskoro!

Title: sinter lemele
Post by: Zeljko on June 23, 2005, 11:29:28 PM

Title: 200 mm za STAKLASTVO
Post by: Zeljko on June 23, 2005, 11:30:01 PM

Title: kocione plocice
Post by: Zeljko on June 23, 2005, 11:30:50 PM

Title: UNO turbo
Post by: Zeljko on June 23, 2005, 11:31:17 PM

Title: SINTER.SI
Post by: Zeljko on December 19, 2005, 10:57:45 PM

Plocice i lamela te cekaju dado!

Title: SINTER.SI
Post by: dodo-128 on December 20, 2005, 05:50:11 AM

Hvala Zeljko jedva cekam da se to krene vrtit :pop:

Title: SINTER.SI
Post by: STOLE_ABARTH on December 20, 2005, 11:21:09 AM

eh da sam sad pri olvi bi i ja uzeo lamelu...:hmmm:

ma budem valjda poslje nove godine...

Title: SINTER.SI
Post by: ALFALUDjAK on December 20, 2005, 12:54:00 PM

ta lamela ide na STOCK korpu?

Title: SINTER.SI
Post by: Zeljko on December 20, 2005, 03:39:43 PM

Na koju god hoces,,, samo moras znati debljinu STOCK lamele---

" stole :hico: prvo bregasta

Title: SINTER.SI
Post by: ikayke on December 20, 2005, 04:01:23 PM

Quote

Originally posted by Zeljko
Na koju god hoces,,, samo moras znati debljinu STOCK lamele---

" stole :hico: prvo bregasta

koliko stupnjeva 314 ili:pop:

Title: SINTER.SI
Post by: STOLE_ABARTH on December 20, 2005, 04:22:35 PM

Quote

Originally posted by ikayke

Quote

Originally posted by Zeljko
Na koju god hoces,,, samo moras znati debljinu STOCK lamele---

" stole :hico: prvo bregasta

koliko stupnjeva 314 ili:pop:

284 ce bit dosta ipak nije to za trke

to je za sramotit sminkere po gradu one tvingice police 206-ice tako da mi i to dosta:car:

Title: SINTER.SI
Post by: ikayke on December 20, 2005, 04:56:05 PM

heheh..... imas pravoo....
:smiley_abuv:

mislim da bi ti sminkerici mogli nadrapat a ti ces im iz auta :mahmah::mahmah::mahmah::mahmah:

Title: SINTER.SI
Post by: R5_ST on January 11, 2006, 12:34:41 AM

Kome se javit u vezi tih lamela?

Title: SINTER.SI
Post by: wladex on January 11, 2006, 12:54:30 AM

zeljku

Title: SINTER.SI
Post by: R5_ST on January 11, 2006, 12:56:50 AM

Broj moba?

Title: SINTER.SI
Post by: Chipani on January 11, 2006, 03:06:04 PM

jel treba dat svoju staru
ja trebam ovakvu kakva je kod staklarstva(ta je sad kod mene a dužan sam vratiti Maljku)

Title: SINTER.SI
Post by: Zeljko on January 11, 2006, 03:32:54 PM

098 695 043

posalji staru lamelu---

Title: SINTER.SI
Post by: ALFALUDjAK on January 11, 2006, 03:34:04 PM

jel se budu naruchivale te lamele ili ne?

Title: SINTER.SI
Post by: Chipani on January 11, 2006, 07:15:40 PM

ima li kakav popust ako pošaljemo np. oko 5 komada
ja,alfa,mk-power,...
ja sam vec prije slao mail u sinter i lamela je po komadu 80 €
još je jedina stavka put:skuteras:

[Edited on 11-1-2006 by Chipani megane]

[Edited on 11-1-2006 by Chipani megane]

Title: SINTER.SI
Post by: Zeljko on January 11, 2006, 11:29:34 PM

Pa dajte vi skupite blizi ste.. evo i jacu se ukljuciti s jos dvije...

Title: SINTER.SI
Post by: dr.Maljak on January 12, 2006, 12:57:08 AM

dali je moguce da ju izrade sa federima, ja bi kompromis...???:ficuk:

Title: SINTER.SI
Post by: DaviiD on January 12, 2006, 08:21:34 AM

Moza sa fedrima, ali onda nije ovaka s krakima nego cela kakvu si dao, samo da skinu stari material i stave karbon te balansiraju.

Title: SINTER.SI
Post by: Zeljko on January 12, 2006, 04:09:03 PM

s federima je nestabilna.-.-.

Title: SINTER.SI
Post by: crank on January 12, 2006, 11:23:28 PM

Quote

Originally posted by Zeljko
Pa dajte vi skupite blizi ste.. evo i jacu se ukljuciti s jos dvije...

jos jednu racunaj:xexe:

Title: SINTER.SI
Post by: dr.Maljak on January 12, 2006, 11:23:41 PM

Zeljko to si mi vec rekao ali ajd reko idem ponovo pitat, mozda si zaboravio...hehehehehe

Title: SINTER.SI
Post by: Zeljko on January 13, 2006, 01:11:10 AM

nemoj da se to ponavlja!:rulez:

Title: SINTER.SI
Post by: dr.Maljak on January 25, 2006, 11:29:24 PM

Mozes stavit bilo koju, proklizivanje ces osjetit jedino poslje voznje u bubrezima...:shpaner:

Title: SINTER.SI
Post by: Zeljko on January 26, 2006, 09:31:10 AM

Quote

Originally posted by fiatuno
ako se uzme takva lamela, di da se nabavi neka bolja korpa,recimo sa malo jačim potiskom

Maljak je imao strasnih problema s klizanjem lamele..
Ali kada je stavio sinter lamelu vise nije bilo niti jedano zrno sumnje da klize :xexe:

Jace lamele s jacim potiskom u principu idu na automobile koji imaju +100HP.. oni koji su vec turbo..
Atmosferski su malo drugacija prica..

Title: SINTER.SI
Post by: ALFALUDjAK on January 26, 2006, 10:50:51 AM

znachi ja ju mogu staviti bez problema i bez straha da che klizati

Title: SINTER.SI
Post by: Zeljko on January 26, 2006, 01:00:56 PM

da.. ukoliko imas problema manjih..
postavi korpu od saksa za lanciu 1.6 Turbo HF

Title: SINTER.SI
Post by: dr.Maljak on January 26, 2006, 09:16:46 PM

tak je...nece bit nikakvih problema, budem stavio filmic gdje mi nova lamela i korpa proklizuje, a onda je dosao sinter...Alfa jos ti imas i veci promjer lamele Kolko je promjer???

Title: SINTER.SI
Post by: ALFALUDjAK on January 26, 2006, 10:10:27 PM

isti ko i od coupe 2.0 16v turbo

Title: SINTER.SI
Post by: Zeljko on January 26, 2006, 11:42:27 PM

fiatuno... pa to su tolike osnove.. ma koji federi..

Title: SINTER.SI
Post by: dr.Maljak on January 27, 2006, 12:06:16 AM

2 Alfa ludak mislim da je 235mm lamela, toliki sinter nece proklizati ni bez korpe...hehehhehehehehee

najveca fora kod te lamele je sto zacvili kad saltas u nizu...

Title: SINTER.SI
Post by: detroit on January 27, 2006, 10:23:39 AM

...koja je razlika između one troperne i stare koju posaljes na obnovu....

Title: SINTER.SI
Post by: Zeljko on January 29, 2006, 09:19:19 PM

cca do 10 dana..

Title: SINTER.SI
Post by: Zeljko on January 29, 2006, 11:01:29 PM

100 evra :pivo:

Title: SINTER.SI
Post by: ivanB on February 24, 2006, 10:42:21 AM

trebam i ja lamelu za clio rs..

Title: SINTER.SI
Post by: Zeljko on February 24, 2006, 11:04:02 AM

Odnesi staru lemelu u DASTEK - Sesvete
Dogovori se s Damirom..

Title: SINTER.SI
Post by: ivanB on February 24, 2006, 11:13:29 AM

Quote

Originally posted by Zeljko
Odnesi staru lemelu u DASTEK - Sesvete
Dogovori se s Damirom..

ok hvala!! bas sutra idem tamo na dyno..

Title: SINTER.SI
Post by: ivanB on March 20, 2006, 11:08:02 AM

stigla mi lamela..

Title: SINTER.SI
Post by: ALFALUDjAK on March 20, 2006, 02:19:46 PM

kakva je to lamela? karbonska?

Title: SINTER.SI
Post by: DaviiD on March 20, 2006, 02:28:06 PM

Karbonska :xexe:

Evo bolje slike:
(http://david.unix-systems.net/cpg/albums/sola/Alfa/Rja/normal_DSC00263.JPG)

Title: SINTER.SI
Post by: ivanB on March 20, 2006, 03:20:26 PM

2 : pa trebala bi biti..

Title: SINTER.SI
Post by: Bartol on March 20, 2006, 09:58:13 PM

KOlko te dosla?

Title: SINTER.SI
Post by: kutija on March 20, 2006, 10:04:14 PM

Jel karbonska spada u organske lamele?

Title: SINTER.SI
Post by: dr.Maljak on March 21, 2006, 08:56:21 AM

HIIIII.... ma daj vidi, sa federima...ma ja cu se upucat....

cekaj pa jel nijeto isti materijal kao ove sto smo mi kupovali?

Koliko soldi?

Title: SINTER.SI
Post by: ivanB on March 21, 2006, 10:44:17 AM

dosla me 100e ravno.. to sam preko damira iz Dasteka uzeo jer nisam imao vremena da sam nosim u Ljubljanu..

Title: SINTER.SI
Post by: dr.Maljak on March 22, 2006, 09:27:06 AM

da mi se netrese hauba i instrument tabla dok krecem...

Title: SINTER.SI
Post by: kutija on March 23, 2006, 02:13:24 AM

Quote

Originally posted by kutija
Jel karbonska spada u organske lamele?

Jel zna netko?

Title: SINTER.SI
Post by: Bartol on December 28, 2006, 10:51:43 PM

Jel ima ko ovu trokraku na autu i kak je zadovoljan??:cool:

Title: SINTER.SI
Post by: Zeljko on December 28, 2006, 11:28:40 PM

Koliko znak trokraku bez federa ima Stole, crank... i jos mnogi koje se nemogu sjetiti..

Title: SINTER.SI
Post by: dr.Maljak on December 28, 2006, 11:42:15 PM

ja...mrzim kretat u koloni...(dojam)

da ali za njezinu namijenu prezadovoljan...

Title: SINTER.SI
Post by: Zeljko on December 28, 2006, 11:45:48 PM

:) :) :) :) U tvom kraju kolone... sto je to?

Title: SINTER.SI
Post by: dr.Maljak on December 28, 2006, 11:48:04 PM

sta se smijes pa to je centar svijeta....ehhehehehehehehe

Title: SINTER.SI
Post by: Zeljko on December 29, 2006, 12:00:03 AM

:respekt:

Title: SINTER.SI
Post by: ALFALUDjAK on December 29, 2006, 08:23:32 AM

ja imam full 6 krakova bez federa na fiatu i ocjena 5++

jedino shto nije bash ugodna u gradskoj vozhnji jer cvili i podrhtava cijeli auto kad pochne loviti

inache sve najbolje o njihovim lamelama

(okvirno - ispala me 180 eura lamela)

Title: SINTER.SI
Post by: killercivic on December 29, 2006, 09:29:06 AM

ja sam uzo prosle godine sintericu za mareu ca. 400nm ima, i sad kad sam mjenjo getribu
lamela je i dalje ko nova, prije se polomio diferencijal nego da bi lamela proklizala.. bolest
lamela je ona u komadu ne oni padovi ko od alfe, dođe 100 eura, auto se normalno vozi
samo malo više gasa treba dat kad se kreće jel se zna zgasit pošto odma primi, na uzbrdici
još malo teže,

Title: SINTER.SI
Post by: alanq4 on December 29, 2006, 02:39:01 PM

Ja imam na Alfi 33 karbonsku, koju ti stavi na original lamelu i došla me 65 eura, radi super!

(http://www.mobisux.com/album/data/500/37391DSC01044.JPG)

Title: SINTER.SI
Post by: Bartol on December 29, 2006, 03:30:20 PM

ma jeb.. gratsku voznju:evo2:
onda cu i ja tu trokraku. Jel je i njezina cjena 100€ ili nesto vise?

Jel bi jos neko uzimo, pa da podjelimo troskove prevoza?

Title: SINTER.SI
Post by: DaviiD on December 29, 2006, 04:15:58 PM

Trokraka je skuplja, ker se od originalne uzima samo centar sto dodze na getribu, a sve ostalo se napravi. Za BMW 1.8 dosla je cca. 17 eur.

Title: SINTER.SI
Post by: killercivic on December 29, 2006, 07:13:15 PM

Quote

Originally posted by Bartol
ma jeb.. gratsku voznju:evo2:
onda cu i ja tu trokraku. Jel je i njezina cjena 100€ ili nesto vise?

Jel bi jos neko uzimo, pa da podjelimo troskove prevoza?

ak ćeš ić javi da ti dam jednu da odneseš

Title: SINTER.SI
Post by: Bartol on December 29, 2006, 10:01:24 PM

2 fiatuno : koju imate

Title: SINTER.SI
Post by: Bartol on December 29, 2006, 10:36:03 PM

kolko te dosla

Title: SINTER.SI
Post by: Zeljko on December 29, 2006, 10:52:56 PM

Petokraka sinko petokraka :hahheh:

Title: SINTER.SI
Post by: Bartol on December 30, 2006, 10:24:27 AM

mislim da ce to malo pricekati:mahmah:
neznam ni kak bum ovo drugo spokrpal

odo trazit neku dobrostojecu zenu, pa da napokon tog juga zavrsim:P:hahheh: