www.quartermile.ws Forum

http://www.eaglerod.com (http://www.eaglerod.com)
http://www.pauter.com/ (http://www.pauter.com/)
http://www.carrilloind.com/ (http://www.carrilloind.com/)
http://www.crower.com/ (http://www.crower.com/)
http://www.oliver-rods.com/products/ (http://www.oliver-rods.com/products/ForgedSBIndex.html#Anchor-SUPE-51416)
http://www.grpconrods.com/ (http://www.grpconrods.com/)
http://www.bmeltd.com/rods.htm (http://www.bmeltd.com/rods.htm)

Ako tko ima jos kojeg proizvodjaca neka ga objavi.

tnx




(http://www.grpconrods.com/rod2.GIF)



[Edited on 27-12-2005 by Zeljko]

Za Pauter i Carillo znam, još kad bi imao love za njih, dao bi ti posla Željko ! :lol2::mahmah:

a ko mozhe nabaviti?

lako staviti linkove... ali treba staviti i pokoju cijenu i sve

Pa ja mogu nabaviti  neke modle po dobrim cijenama....

Hej Doc.. znas ti sto o cijenam i nekim izvorima...

Da budem iskren, ne, samo  sam se malo raspitivao o plaćanju i naručivaju preko net-a sa on-line shopova u SAD, kratko rečeno skupo za naše uvjete.....:tuzan:

ZHELJKO pitaj za cijenu 4 klipnjache za lanciu deltu HF turbo integrale 2.0 16v

zanimaju me klipnjache koje podnose 500 konja

evo imam ja još jednog proizvođača....
http://www.farndon.com/

CIJENE?

evo primjer...
EN24T forged steel H section za Ford Duratec mašinu: 174.75 funti po komadu
uglavnom su sve cijene iste...više manje

uglavnom za race aplikacije, ARP šrafi, ušteda do 30-60g od konvencijalnih forged steel(neznam kak se točno veli na hrvatskomeLOL) klipnjača

previse para.... sve ispod 200$ dolazi u obzir...

PUTER conrods

(http://www.pauter.com/images/Tirod.jpg)

Never seen a broken/destroyed Pauter! Only damaged but never complete broken and reason for engine destroy!

(http://img137.imageshack.us/img137/337/0907071340.jpg) (http://img137.imageshack.us/i/0907071340.jpg/)

moje omiljene, moj izbor

Dali neko iz hrvatskoj ima pauter rods?

Znamo da ti imas te klipnjace.  to je najbitnije.


Pauter Billet Rods
Precision machined steel rods available for the popular Nissan VQ35DE engines. This unique design is lightweight, yet very strong.


Specifications
E4340 vacuum melt chrome moly forging – CNC machined Heat-treated to Rockwell C36; full coverage shotpeened; end-to-end balanced in sets. Pauter 220k psi tensile strength MSP220 steel, J-formed, rolled thread racing rod bolts (standard.) Aluminum-bronze wrist pin bushings (standard.) EDM pressure-fed oiling to pin (available at extra cost.) Custom pin diameters and center-to-center rod lengths can be ordered at no additional cost. High-performance bearings, tool steel wrist pins and forged aluminum pistons can be ordered specifically coordinated to your rod order (please inquire.) The following list is a sampling of popular rods for all crank driven engines. It is by no means a complete listing. Keep in mind that we are geared for the production of custom sizes in nearly all engine series.

Years of hands-on experience, working with rods of all shapes and materials, of all types of racing and racing-related abuse, with design failures (and successes), has resulted in a fairly comprehensive file on just what works - and what doesn't - on the subject of high performance connecting rods. From this body of knowledge we have selected and incorporated the elements into what it is we think a great rod should be. Right off, our rod looks different, that's obvious, but for some not so obvious and very good reasons.

For starters, the simple beam design completely eliminates thin and non-uniform cross sections over the total length of the beam. This feature greatly improves resistance to crack-induced metal fatigue. In addition, the non-tapered profile of the beam helps to spread potentially harmful stress over a larger area, dispersing instead of concentrating these destructive loads. The design also efficiently places needed material in critical transitional areas, giving maximum support exactly where it is needed (such as directly under the wrist pin). The streamlined contour also provides subtle benefits in the form of windage reduction and breather/catch can function (so our customers tell us). The main beam rib itself continues around the wrist pin boss, perfectly integrating the beam to the pin boss, a small, but important contribution to overall structural unity. Pauter rods are indeed, different by design.

All rods come standard with precision rod cap alignment sleeves pressed into the rod body to accurately and repeatedly locate the cap, restrict split line creep and maintain bore concentricity. All rods are manufactured with aluminum bronze wrist pin bushings unless no bushing is specifically requested. Rods can be ordered with upgrade bolts if desired (this extra cost option must be coordinated with our tech department in advance). Direct pressure fed pin oiling (rifle drilling) is also an extra cost option but must be requested at the time of order. Rods outside our forging limits will be machined from the same material in solid bar stock, but will not follow normal pricing and delivery figures quoted in this web or other Pauter literature.