Custom I - H Beam 4340 Steel Conrods

[Zeljko]

Custom I / H klipnjace po zelji i dimenzijama za bilo koji motor.

Radimo po uzorku (nacrtu) i naglaseni centar centra.

NApravljena od 40 Cr Ni Mo7


PRIMJER:

The dimensions of our Fiat 1.4L conrods(weight 540g):
Engine pcs/set (mm)c-c B/E Dia G/Pin Dia B/E Width S/E Width Bolt Size
FIAT PUNTO 1.4L 4 128.5 48.64 22 25.425 25.425 3/8 UNF
The machining tolerances:
Big End and Small End Tolerance: ║э +/-0.00017"
Verticality, Parallelism and Distortion: ║э +/-0.00018"
Center to Center Distance Tolerance: ║э +/-0.001"
Sets weight matched to +/-1 gram.
 These rods fit our 3/8" rod-bolts(190,000psi~220,000psi fastner yield strength)

[Zeljko]

High Performance 4340 Forged Steel(40CrNiMoA) H-Beam or I-Beam Connecting Rods.

Features:
- Material:SAE 4340 Forged Steel. (40CrNiMoA)
- Hardness after quenching and tempering is HRC35-38.
- 3-D design offers the advantages of reduced weight without sacrificing strength.
- 2 piece forging for increased strength.
- Silicon bronze bushings for floating piston pins.
- Each forging is X-rayed, sonic tested and magnafluxed.
- Special doweled cap and profiled clearance for stroker application.
- Fully machined on all surfaces, shot peened to relieve stress.
- Sets weight matched to +/-1.5 grams.


Rods

Chevrolet Small Block - 283 / 327 / 305 / 350 / 400,
Chevrolet Big Block - 396 / 454 / 502,
Ford Small Block - 289 / 302 / 5.0L / 351 Windsor,
Ford Big Block - 429 / 460,
Chrysler Small Block Mopar 273 / 318 / 340 / 360,
Chrysler Big Block Mopar "RB" 413 / 426 / 440,
Mitsubishi EVO 4G63 (Early & Late Version), Mitsubishi Lancer 1.8l 4G93,
Mitsubishi 3000GT V6 6G72,
Honda Acura / Integra B18A, B18B, B18C, Honda B16A,
Honda D16,
Honda K20,
Honda K22,
Honda F20C S2000,
Nissan S13 / S14: CA18DET / SR20DET,
Nissan Skyline GTR RB25 / RB26,
Nissan RB20,
Nissan RB29, RB30,
Nissan L28,
Nissan VG30,
Nissan VQ35,
Nissan Patrol 4.2L, 4.5L, 4.8L,
Toyota Supra 2JZ,
Toyota 3S GTE,
Toyota 7MGTE,
Toyota Starlet 1.3L,
Toyota 4AGE,
Toyota Land Cruiser 1FZ- FE 6cyl 4. 5L 154mm 4JZ- FE V8 146mm,
Subaru Impreza WRX EJ18, EJ20, EJ22, EJ25, Or stroker size,
Kawasaki Motorcyle,
Suzuki Hayabusa Motorcyle,
Ford Cosworth,
Ford Sigma 1.6L,
Ford Duratec 1.6L, 2.0L, 2.3L, 2.5L,
Ford Pinto,
Ford Zetc,
Opel Vauxhall 2.0L 16V,
Opel 2.2L,
Opel Corsa 1.4L / 1.6L,
Opel C30SE 3.0L 24V,
Renault Willams / Clio 2.0L,
Audi S2 / S3, Audi RS2, RS4, Audi 2.5L, Audi V6,
V.W VR6, V.W Golf 1.8L, Jetta 1.8L,
V.W Golf 2.0L 8V & 2.0L 16V,
BMW M3 E30 / E36 / E46 / E56,
BMW S14 / S50 / S52, BMW M5 3.6L,
BMW M10, M20, M50,
BMW M5 3.6L / 3.8L,
BMW Mini Cooper S,
VOLVO B230,
Saab 900,
Porsche,
Rover A,
Rover K,
Rover T620,
Fiat Punto,
Fiat Lancia,
Fiat Coupe,
Fiat Abarth,
Alfa V6,
Alfa Romeo 2.0L,
Mazda 2.0L FE,
Hyundai Accent, Scoupe

[Zeljko]

nice

[Zeljko]

AKCIJA kompletan set (4 klipnjace) za vecinu modela na ruke 300 E 
custom aplikacija ili X BEAM do 400 E
Akcija samo 7 dana.

Pojam I H X BEAM CONRODS

[Zeljko]

Izvor
Povodom sumnje u "kinesko smece" primorani smo odati izvor.

http://www.ercolicompeticion.com.ar/


Rods Features:
- Material: Precision forged 4340 EN24 aircraft chrome moly quality steel.
- Hardness after quenching and tempering is HRC35-38.
- 3-D design offers the advantages of reduced weight without sacrificing strength.
- 2 piece forging for increased strength.
- Silicon bronze bushings for floating piston pins.
- Each forging is X-rayed, sonic tested and magnafluxed.
- Special Dowelled Cap for precision fit.
- Fully CNC machined on all surfaces, shot peened to relieve stress.
- Premium cap screw type bolts(190,000psi - 220,000psi tensile strength).

Machining Tolerances:
Big End and Small End Tolerance: <= +/-0.00017"
Verticality, Parallelism and Distortion: <= +/-0.00018"
Center to Center Distance Tolerance: <= +/-0.001"
Sets weight matched to +/-1 gram.

[Brane]

Odlična stvar!

[Zeljko]

Custom X Beam CONRODS

[Zeljko]

12 komada za uno turbo 1.4

[Zeljko]

H beam Conrods TU5JP4 i FIAT FIRE 1.2 16V / 1.4 16V

[Zeljko]

Za fiat 128 1.1 1.3 -  120mm centar centar
Vijci ARP2000 cat cams

[sime]

Kad dolazi Argentinski brod?

[Zeljko]

Uskoro dolazi jos jedan.
uskaci u posiljku.
Akcija za H profil klipnjaci.

[Zeljko]

Za fiat 128 1.1 1.3
centar centar 120mm klipnjace u ponudi.

cijena na upit.

Povoljno na akciji.

[STOLE_ABARTH]

ja bi jedne, evo poslo sam upit

[Zeljko]

Odmah raspolozivo za  fiat  120mm, 128,52mm; Peugeot TU5JP4 1.6 138mm  KIT CAR centar centar