Skaynam Sybele Winjall challenger4+ commander44 Software Security update

[Zeljko]

POSTER

[Fredy]

Može li Željko molim te više informacija o ovim uređajima?
http://www.skynam.com/voir_cat.php?id=10

koja je razlika između prva dva za challenge?

da li su zadnja dva uređaja vezana uz mjerenje vremena kruga?
vidim nekakav infracrveni risiver i transmitor...

da li ti infra crveni uređaji  ( lap time ) rade samo uz sybele ili mogu se premjestiti na drugi auto, kart ?

cijene su ove sa slike?

[Zeljko]

ups... ovaj post nisam ni vidio... tnx Reverchon

[Zeljko]

Dodaci:

Winjall_ENU-3.7.0.0.zip
SECURITY IMPORTANT MODIFICATION
Warning level : Hight

A CALCULATION ERROR HAS BEEN MENDED ON TUNEWARE SAVING ON HARD DRIVE
Under some conditions, after saving a Tuneware on hard drive (function 'Save Tuneware' or 'Update Tuneware') some maps could be lost.
After a Machine Update with a damaged Tuneware, the engine refuses to start, displaying an injection time of 65 milliseconds and an ignition advance near from 360°.
This 3.7.0.0 fixes this bug and warns when a damaged Tuneware is used.
1) Only internal maps and data not tunable can be damaged.
2) Your tunings are not damaged by this error.

DAMAGED TUNEWARE CORRECTION METHOD:
1) Open the damaged Tuneware on the GENERIC MACHINE. Winjall analyses the data and displays an error report.
2) Winjall monitors you to make a mending update :
At its request, select as mending base Tuneware a Skynam Tuneware of the same type than the one of the damaged Tuneware (ie : Throttle/RPM, sequential gearbox, ...).
The valid data of the damaged Tuneware (your data) are injected in this Genuine Tuneware.
The invalid data of the damaged Tuneware (not accessible data) are discarded and the Genuine Tuneware keeps its own.
Save the new done Tuneware when Winjall askes to with the name of the damaged Tuneware that has so been corrected.

USE OF THE KEYBOARD HAS BEEN MODIFIED
To better fit with Windows standards ((c)Microsoft Corporation), the use of the keys [PgUP] and [PgDown] has been replaced by the use of the [TAB] key.
1) To move from one displayed tuning page to another, use the [CTRL+TAB] combination for a forewarding move and [SHIFT+CTRL+TAB] for a backwarding one.
2) To move from one data to another in the displayed page, use the [TAB] key for a forewarding move and [SHIFT+TAB] for a backwarding one.

POSSIBILITY OF CREATING OTHER GENERIC MACHINES
To make easier compar and copy/paste data by hand without having to use a real ECU, you can create up to height generic machines.
1) Ask the WinjNet context menu by right clicking in the WinjNet machine tree root (at the top of the main Winjall window left part).
2) Select 'Add another generic machine'.
3) Some former Tunewares cannot work on these other generic machines, as for exemple The Challenger4 Tunewares up to 6.10 version
You so have to download and install newer Tuneware versions, if they exist, to use this functionnality.

Chal4_ENU-6.1.1.0.zip
SECURITY CRITICAL MODIFICATION
Warning level : Maximum
MANDATORY INSTALLATION of a version V6.1.0.0 or latter to securise machines and Tunewares.

*** CONTENT ***

Chal4_FRA-6.1.1.0.zip software pack is identical to Chal4_FRA-6.1.0.0.zip pack for the Challenger4 ECU inside working (same Tunewares).
This 611 version allows in addition to use the new functionnalities of Winjall 3.6.0.0 as the use of many generic machines (virtual ECUs) together for the copy/paste an Tuneware comparison operations without the need of an ECU physically connected to the PC (see Winjall specific downloading).
A documentation error on the electric installation of the turbo solenoid valves has been corrected.
Challenger4 Tunewares: critical modification (see explicative)
- Throttle/RPM: V610 (new - 30th 10/2007)
- Pressure/RPM and turbo: V610 (new - 30th 10/2007)
Challenger4 former Tunewares archives:
- Throttle/RPM: V420-600
- Pressure/RPM and turbo: V300-600
Documentations in English:
- Challenger4 tuning software pack: V1.32 (30th 10/2007)
- Challenger4+ installation: V1.23 - ignition modules management (new - 29th 04/2008)
- Challenger4+ options installation: V1.20 - sequential gearboxes, motorised throttles, air electrovalves, bang-bang, ... (27th 08/2007)
Note:
- Does not content Winjall software. Winjall must first be downloaded and installed apart.

[Zeljko]

Trenutna KIT akcija

[Zeljko]

nadogradnje:

Winjall_ENU-3.9.2.0.zip

Management of professional licenses for year 2009
Warning level : Normal

*** NEW FUCTIONS AND IMPROVEMENT ***

Management of professional licenses for year 2009
Owners of professional licenses for year 2009 must install this version for a correct working of the license.
Standard licenses can use this version too.

*** CONTENT ***

Winjall:
- V3.9.2.0 (new - 4th 01/2009)
Documentations in English:
- Winjall User's Manual: V1.35 (new - 31th 10/2008)
Note:
- This software pack does not content any Tuneware. The Tunewares have to be downloaded and installed apart.

*** HOW TO INSTALL WINJALL ***

- Download new Winjall .zip file to save it in a directory on your hard disk.
- If you have already install a former Winjall version, you have to usinstall it before installing this new one:
In Windows, execute 'Start\Parameters\Configuration\Add-Sup softwares'. In the software list, select 'Winjall' (end of liste) then 'Uninstall'. Follow uninstall instructions.
- With explorer, double click on the downloaded Winjall .zip file, then double click on Setup. At the question on files extraction, answer 'Extract All'.
- If the installation does not automatically start: in the new directory created by the extraction, double click on Setup (application).

*** FRIEND ADVICES ***

- It is mandatory to install new versions on your COMPUTER AND IN THE ECUs.
- Set on your bedhead table the new Winjall and ECU software pack documentations, and read one page every evening, it will help to win races (and to have a good night).


     Chal4_ENU- 6.1.1.0 .zip
SECURITY CRITICAL MODIFICATION
Warning level: Maximum
MANDATORY INSTALLATION off has version V 6.1.0.0 but to lath to protected machines and Tunewares.

*** CONTENT ***

Chal4_FRA- 6.1.1.0 .zip software pack is identical to Chal4_FRA- 6.1.0.0 .zip pack for the Challenger4 ECU inside working (same Tunewares).
This 611 version allows in to addition uses off the new functionnalities Winjall 3.6.0.0 ace the uses off many generic machines (virtual ECUs) together for the Copy/paste year Tuneware comparison operations without the need off year ECU physically connected to the PC (see Winjall specific downloading).
With documentation error one the electric installation off the turbo solenoid valves has been corrected.
Challenger4 Tunewares: critical modification (see explanatory)
- Throttle/RPM: V610 (new - 30th 10/2007)
- Pressure/RPM turbo and: V610 (new - 30th 10/2007)
Challenger4 to form Tunewares files:
- Throttle/RPM: V420-600
- Pressure/RPM turbo and: V300-600
Documentations in English:
- Challenger4 tuning software pack: V1.32 (30th 10/2007)
- Challenger4+ installation: V1.23 - ignition modules management (new - 29th 04/2008)
- Challenger4+ options installation: V1.20 - sequential gearboxes, motorised throttles, air electro-valves, bang-bang,… (27th 08/2007)
Note:
- Does not content Winjall software. Winjall must first Be downloaded and installed apart.


     Winjall_ENU- 3.9.0.0 .zip
FIRST VERSION WHITEBAIT TO MANAGES TO ORDER ECU
Warning level: Normal

TO ORDER ECU
They are very powerful and fast ECUs, for diesel fuel ace for engines.
Their possibilities important are so that has supplements presentation document had to Be made.
We engages off you to download this document from the Commander ECUs page the web site.

*** CONTENT ***

Winjall:
- V 3.9.0.0 (new - 09th 10/2008)
Documentations in English:
- Winjall User' S Manual: V1.34 (new - 09th 10/2008)
Note:
- This content software pack does not any Tuneware. The Tunewares cuts to Be downloaded and installed apart.

*** HOW TO INSTALL WINJALL ***

- Download new Winjall .zip file to save it in has directory one your hardware disk.
- Yew you cuts already install has to form Winjall version, you cuts to usinstall it before installing this new one:
In Windows, “Start \ Parameters \ Configuration \ Add-Sup softwares carries out”. In the software list, select “Winjall” (end off list) then “Uninstall”. Follow uninstall instructions.
- With to explore, double click one the downloaded Winjall .zip file, then double click one Setup. At the question one files extraction, answer “Extract All”.
- Yew the installation does not automatically start: in the new directory created by the extraction, click one doubles Setup (application).

*** FRIEND ADVICES ***

- It is mandatory to install new versions one your COMPUTER AND IN THE ECUs.
- Set one your bedhead table the new Winjall and ECU software pack documentations, and read one page every evening, it will help to win races (and to cuts has good night).


********************************
VERSION HISTORY
********************************

Improvements are added from has version to the next one.


*** V 3.7.0.0: SECURITY CRITICAL MODIFICATION ***

[Zeljko]

Winjall_ENU-4.0.0.0.zip
SECURITY CRITICAL MODIFICATION
Warning level : Maximum

MANDATORY INSTALLATION TO ACCESS TO NEW (SECURISED) MACHINES.
If this update is not done, the added consequences to security risks will be:
- Not be able to enter in Challenger4 machines, that have been loaded with V630 and latter versions by manufacturing or by a user
- Not be able to enter in Commander44 machines, that have been loaded with V240 and latter versions by manufacturing or by a user
THIS UPGRADE DOES NOT CONTENT ANY TUNEWARE
The Tunewares have to be downloaded and installed apart.

*** CONTENT ***

Winjall: critical modification (see explicative)
- V4.0.0.0 (new - 26th 06/2009)
Documentations in English:
- Winjall User's Manual: V1.40 (new - 26th 06/2009)
Note:
- This software pack does not content any Tuneware. The Tunewares have to be downloaded and installed apart.

*** WINJALL CRITICAL MODIFICATIONS ***

This version is the only one to manage the new securised ECUs and securised Tunewares.
Machines access control.
See details in the 'Security update' function in Winjall User's Manual.

*** NEW FUCTIONS AND IMPROVEMENT ***

Mandatory installation to benefit from new Commander44 V240 et Challenger4 V620 Tunewares.
A) IMPROVEMENTS:
1) Permanent display of the comments in front of the data.
B) WINJALL ERRORS CORRECTION:
1) The injection time map modification in crankshaft degrees by 0.1% step had some problems : the quantity could be decreased when an increase by 0.1% was asked.
The actual quantity was however displayed in the map, allowing to spot the error.

*** HOW TO INSTALL WINJALL ***

- Download new Winjall .zip file to save it in a directory on your hard disk.
- If you have already install a former Winjall version, you have to usinstall it before installing this new one:
In Windows, execute 'Start\Parameters\Configuration\Add-Sup softwares'. In the software list, select 'Winjall' (end of liste) then 'Uninstall'. Follow uninstall instructions.
- With the explorer, double click on the downloaded Winjall .zip file, then double click on Setup. At the question on files extraction, answer 'Extract All'.
- If the installation does not automatically start: in the new directory created by the extraction, double click on Setup (application).

*** FRIEND ADVICES ***

- It is mandatory to install new versions on your COMPUTER AND IN THE ECUs.
- Set on your bedhead table the new Winjall and ECU software pack documentations, and read one page every evening, it will help to win races (and to have a good night).





     Chal4_ENU-6.3.0.0.zip
SECURITY CRITICAL MODIFICATION
Warning level : Maximum

MANDATORY INSTALLATION of a version V6.3.0.0 (with system 610) or latter to securise machines and Tunewares.

*** NEW FUCTIONS AND IMPROVEMENT ***

1) Full resistant to memory lost on alimentation tension drops at the engine start.
2) Improvement of machine internal security and Tunewares security.
3) Error corrected in Winjall on calibrations functions locked when exit from Top Dead Center calibration with cancel button.

*** CONTENT ***
A major improvement of the documentation

Challenger4 Tunewares: critical modification (see explicative)
- Throttle/RPM: V620 with system V610 (new - 26th 06/2009)
- Pressure/RPM and turbo: V630 with system V610 (new - 26th 06/2009)
Challenger4 former Tunewares archives:
- Throttle/RPM: V420-610
- Pressure/RPM and turbo: V300-620
Documentations in English:
- 18 documents, each one deals with a functionnality of the Challenger4, deeply with explicative examples (30th 10/2008)
- Challenger4+ installation: V1.30 - ignition modules management (new - 26th 06/2009)
- Challenger4+ options installation: V1.20 - sequential gearboxes, motorised throttles, air electrovalves, bang-bang, ... (27th 08/2007)
Note:
- Does not content Winjall software. Winjall must first be downloaded and installed apart.

*** NEEDING ***

V4.0.0.0 version of Winjall software must mandatory have been installed first.

*** SECURITY CRITICAL MODIFICATION ***

[Zeljko]

http://www.skynam.com/details_cat.php3?cat=11

Winjall_ENU-4.1.0.0.zip
SIGURNOST KLJUČNE IZMJENE
Upozorenje nivo: Maksimalna

MICROSOFT-COMPANY, postalo je jasno NA SOFTVER DEVELOPPMENT tvrtke za pružanje NOVA VERZIJA SECURISED kada koriste neke napredne funkcije.
OBVEZNI-MONTAŽA VERZIJA potonji V4.0.0.0 DO pristup novim (SECURISED) STROJEVI.
Ako je ovo ažuriranje nije učinjeno, dodao posljedice na sigurnosne rizike će biti:
- Ne moći ući u Challenger4 strojeva, koji su bili opijeni V630 i kasnije verzije po proizvodnji ili korisnik
- Ne moći ući u Commander44 strojeva, koji su bili opijeni V260 i kasnije verzije po proizvodnji ili korisnik
Ova nadogradnja NE SADRŽAJA BILO TUNEWARE
Tunewares moraju biti preuzimanje datoteka i Installer apart.

SADRŽAJ *** ***

Winjall: kritični modifikacija (vidi eksplikativan)
- V4.1.0.0 (nova - 16. 10/2009)
Dokumentacija na engleskom jeziku:
- Winjall Priručnik: v1.40 (26. 06/2009)
Napomena:
- Ovaj paket softvera ne bilo koji sadržaj Tuneware. Tunewares moraju biti preuzimanje datoteka i Installer apart.

*** WINJALL KLJUČNE PROMJENE ***

Verzija sa V4.0.0.0 su samo one za upravljanje novim securised ECU i securised Tunewares.
Strojevi kontrole pristupa.
Pogledajte detalje u "Security Update 'funkciju u Winjall Priručnik.

*** NOVO *** FUCTIONS I POBOLJŠANJE

Obvezni instalacije da imaju koristi od novih Commander44 V260 et Challenger4 V620 Tunewares.

*** Kako instalirati WINJALL ***

- Download nove Winjall. Zip datoteku da biste je spremili u direktorij na vašem tvrdom disku.
- Ako ste već instalirali bivši Winjall verziju, morate ga usinstall prije instaliranja ovog novog:
U Windowsima, izvršiti 'Traži \ Parameters \ Configuration \ Add-Sup softwares ". Na popisu programa odaberite 'Winjall' (kraj liste) onda 'Deinstaliraj'. Slijedite upute za deinstaliranje.
- Sa istraživač, duplo kliknite na preuzimanje datoteka Winjall. Zujanje varalica, zatim dvaput kliknite na Setup. Na pitanje o datotekama ekstrakcija, odgovor 'Extract All'.
- Ako se instalacija ne pokrene automatski: u novom imenik oformljen mimo vađenje, duplo kliknite na Setup (aplikacija).

Prijateljski *** *** SAVJETI

- Ona je obavezna za instalaciju nove verzije na vašem računalu i u ECU.
- Postavite na vašem stolu bedhead novi Winjall i ECU software paket dokumentacije, te pročitati jednu stranicu svaku večer, to će pomoći da se pobijediti utrke (i da imamo dobru noć).





  Chal4_ENU-6.3.0.0.zip
SIGURNOST KLJUČNE IZMJENE
Upozorenje nivo: Maksimalna

OBVEZNI INSTALACIJA od verzije V6.3.0.0 (sa sustavom 610) ili kasnije do securise strojeva i Tunewares.

*** NOVO *** FUCTIONS I POBOLJŠANJE

1) Full otporne na memorijsku izgubio na izdržavanje napetost kapljice na motor starta.
2) Poboljšanje stroj unutarnje sigurnosti i Tunewares sigurnost.
3) Pogreška ispravljen u Winjall na funkcije kalibracije zaključana prilikom izlaska iz mrtvih Vrh Centar kalibracija s cancel button.

SADRŽAJ *** ***
Glavni poboljšanje dokumentacije

Challenger4 Tunewares: kritični modifikacija (vidi eksplikativan)
- Polugu za gas / RPM: V620 sa sustavom V610 (nova - 26. 06/2009)
- Pritisak / RPM i turbo: V630 sa sustavom V610 (nova - 26. 06/2009)
Challenger4 bivši Tunewares arhiva:
- Polugu za gas / RPM: V420-610
- Pritisak / RPM i turbo: V300-620
Dokumentacija na engleskom jeziku:
- 18 dokumenata, svaka bavi functionnality od Challenger4, duboko eksplikativan s primjerima (30. 10/2008)
- Challenger4 + instalacija: V1.30 - paljenje moduli za upravljanje (nova - 26. 06/2009)
- Challenger4 + mogućnosti instalacije: V1.20 - sekvencijalni mjenjači, motorizirani throttles, klima electrovalves, bang-bang, ... (27. 08/2007)
Napomena:
- Ne sadržaja Winjall softver. Winjall prvo mora biti preuzimanje datoteka i Installer apart.

*** Trebaju ***

V4.0.0.0 verzija Winjall softver mora obavezno biti instaliran najprije.

*** SIGURNOST KLJUČNE IZMJENE ***

Budući da sustav verzija V610, poboljšanje stroj unutarnje sigurnosti.
Osobito kada tuning, ažuriranje i spajanje vijkom ECU.
Nema parazit programa ili podataka može biti umetnuta.

*** FUNCTIONMENT KLJUČNE IZMJENE ***

Budući da sustav verzija v500 i na taj način ovaj novi:
TOP mrtva točka kalibracije je izvršiti PONOVNO
- Ako je promijeniti iz Hall efekta ili RPM senzor faze na induktivnih jedna je učinio, ili obrnuto.
- Ako je uvoz iz tuning verzije fromer od v500 pomoću RPM dvorana effet faza ili senzor
Za motori opremljeni induktivnih senzora sa mjenjanje vrste senzora, bez modifikacija.

U stvari, na bivše verzija od v500, Hall efekt i Induktivni senzori (RPM i faza) pročitajte theet pada rubova.
Uz senzor Hall efekt, ECU mogla gubi svoju sinkronizacije čitanje tih pada rubova.
OD SYSTEM VERZIJA v500, Hall senzori pročitao rastu zubi rubovima da oni vide puno bolje.
Induktivni senzori držati na eading zubima padala edgesthat vide puno bolje.
Rezultira Značajan napredak SHIFT sa ovim novim verzijama Tunewares pri korištenju dvorana effet faza ili RPM senzora u odnosu na induktivnih senzora.
Ako Vrh Dead Centar kalibracija nije izvršen za svaki senzor tipa, ima stvarno SE MOTOR BROKEN rizike.

UPOZORENJE:
Da bi se izbjegla motor iznevjeravana TDCM kalibracija zaborava sa senzorima Hall efekt, Winjall ne uvoz dvorana Vrsta senzora prilikom ažuriranja novog Tunewares (od v500) sa starim Tunewares (bivši od v500).
U ovom slučaju, senzori ostati na induktivne tipa, a motor neće početi uopće, ako je opremljen sa jednim ili dva Hall senzora.
Nakon toga morati izvršiti 'Sensor type' kalibriranje podesiti ručno Hall tipa, a poruka upozorenja s mrtve glave pokazati da se sjeća da TDCM kalibracije je za promjenu.

*** Kako instalirati STROJ Packs ***

- Download nove Challenger4. Zip datoteku da biste je spremili u direktorij na vašem tvrdom disku.
- Ako već imate instaliran bivši Challenger4 verzija: U Windowsima, izvršiti 'Traži \ Parameters \ Configuration \ Add-Sup softwares ". Na popisu programa odaberite 'Challenger4' onda 'Deinstaliraj'. Slijedite upute za deinstaliranje.
- Sa istraživač, duplo kliknite na dowloaded Challenger4. Zujanje varalica, zatim dvaput kliknite na Setup. Na pitanje o datotekama ekstrakcija, odgovor 'Extract All'.
- Ako se instalacija ne pokrene automatski: u novom imenik oformljen mimo vađenje, duplo kliknite na Setup (aplikacija).

FRIEND *** *** SAVJETI

- To je vrlo važno za instalaciju nove verzije na vašem računalu i u ECU.
- Postavite na vašem stolu bedhead novi Winjall i ECU software paket dokumentacije, te pročitati jednu stranicu svaku večer, to će pomoći da se pobijediti utrke (i da imamo dobru noć).

[Zeljko]

2010 year Skaynam Sybele Winjall  challenger4+ commander44 Software Security update!


http://www.skynam.com/telechargement.php

Winjall_ENU-4.1.0.0.zip
SECURITY CRITICAL MODIFICATION
Warning level : Maximum

-MICROSOFT COMPANY HAS BEEN ASKING TO THE SOFTWARE DEVELOPPMENT COMPANIES TO PROVIDE A NEW SECURISED VERSION WHEN THEY USE SOME ADVANCED FUNCTIONS.
-MANDATORY INSTALLATION OF A LATTER V4.0.0.0 VERSION TO ACCESS TO NEW (SECURISED) MACHINES.
If this update is not done, the added consequences to security risks will be:
- Not be able to enter in Challenger4 machines, that have been loaded with V630 and latter versions by manufacturing or by a user
- Not be able to enter in Commander44 machines, that have been loaded with V260 and latter versions by manufacturing or by a user
THIS UPGRADE DOES NOT CONTENT ANY TUNEWARE
The Tunewares have to be downloaded and installed apart.



     Chal4_ENU-6.3.0.0.zip
SECURITY CRITICAL MODIFICATION
Warning level : Maximum

MANDATORY INSTALLATION of a version V6.3.0.0 (with system 610) or latter to securise machines and Tunewares.

*** NEW FUCTIONS AND IMPROVEMENT ***

1) Full resistant to memory lost on alimentation tension drops at the engine start.
2) Improvement of machine internal security and Tunewares security.
3) Error corrected in Winjall on calibrations functions locked when exit from Top Dead Center calibration with cancel button.

*** CONTENT ***
A major improvement of the documentation

Challenger4 Tunewares: critical modification (see explicative)
- Throttle/RPM: V620 with system V610 (new - 26th 06/2009)
- Pressure/RPM and turbo: V630 with system V610 (new - 26th 06/2009)
Challenger4 former Tunewares archives:
- Throttle/RPM: V420-610
- Pressure/RPM and turbo: V300-620
Documentations in English:
- 18 documents, each one deals with a functionnality of the Challenger4, deeply with explicative examples (30th 10/2008)
- Challenger4+ installation: V1.30 - ignition modules management (new - 26th 06/2009)
- Challenger4+ options installation: V1.20 - sequential gearboxes, motorised throttles, air electrovalves, bang-bang, ... (27th 08/2007)
Note:
- Does not content Winjall software. Winjall must first be downloaded and installed apart.

[Zeljko]

UPDATE 01.03.2010

    Au total, 12 logiciels dans 5 catégories.   
    

    Drivers
   

4 logiciels.
   
    

    Commander essence
   

2 logiciels.
   
    

    Challenger4
   

2 logiciels.
   
    

    Winjall - PC
   

2 logiciels.
   
    

    Sensors Actuators
   

2 logiciels.

http://www.skynam.com/

[Zeljko]

     Winjall_ENU-4.2.0.0.zip
Warning level : Normal

MANDATORY INSTALLATION OF A LATTER V4.0.0.0 VERSION TO ACCESS TO NEW (SECURISED) MACHINES.
The versions from V4.0.0.0 are the only ones to manage the new securised ECUs and securised Tunewares.

*** CONTENT ***

Winjall:
- V4.2.0.0 (new - 28th 01/2010)
Documentations in English:
- Winjall User's Manual: V1.50 (28th 01/2010)
Note:
- This software pack does not content any Tuneware. The Tunewares have to be downloaded and installed apart.

*** NEW FUCTIONS AND IMPROVEMENT ***

1) Access function to full display maps for computers with small screens.
2) Mandatory installation to benefit from new Commander44 V270, Commander6D V140 and Challenger4 V630 Tunewares.

*** HOW TO INSTALL WINJALL ***

- Download new Winjall .zip file to save it in a directory on your hard disk.
- If you have already install a former Winjall version, you have to usinstall it before installing this new one:
In Windows, execute 'Start\Parameters\Configuration\Add-Sup softwares'. In the software list, select 'Winjall' (end of liste) then 'Uninstall'. Follow uninstall instructions.
- With the explorer, double click on the downloaded Winjall .zip file, then double click on Setup. At the question on files extraction, answer 'Extract All'.
- If the installation does not automatically start: in the new directory created by the extraction, double click on Setup (application).

*** FRIEND ADVICES ***

- It is mandatory to install new versions on your COMPUTER AND IN THE ECUs.
- Set on your bedhead table the new Winjall and ECU software pack documentations, and read one page every evening, it will help to win races (and to have a good night).





     Winjall_ENU-4.2.0.0.zip
Warning level : Normal

MANDATORY INSTALLATION OF A LATTER V4.0.0.0 VERSION TO ACCESS TO NEW (SECURISED) MACHINES.
The versions from V4.0.0.0 are the only ones to manage the new securised ECUs and securised Tunewares.

*** CONTENT ***

Winjall:
- V4.2.0.0 (new - 28th 01/2010)
Documentations in English:
- Winjall User's Manual: V1.50 (28th 01/2010)
Note:
- This software pack does not content any Tuneware. The Tunewares have to be downloaded and installed apart.

*** NEW FUCTIONS AND IMPROVEMENT ***

1) Access function to full display maps for computers with small screens.
2) Mandatory installation to benefit from new Commander44 V270, Commander6D V140 and Challenger4 V630 Tunewares.

*** HOW TO INSTALL WINJALL ***

- Download new Winjall .zip file to save it in a directory on your hard disk.
- If you have already install a former Winjall version, you have to usinstall it before installing this new one:
In Windows, execute 'Start\Parameters\Configuration\Add-Sup softwares'. In the software list, select 'Winjall' (end of liste) then 'Uninstall'. Follow uninstall instructions.
- With the explorer, double click on the downloaded Winjall .zip file, then double click on Setup. At the question on files extraction, answer 'Extract All'.
- If the installation does not automatically start: in the new directory created by the extraction, double click on Setup (application).

*** FRIEND ADVICES ***

- It is mandatory to install new versions on your COMPUTER AND IN THE ECUs.
- Set on your bedhead table the new Winjall and ECU software pack documentations, and read one page every evening, it will help to win races (and to have a good night).

[Zeljko]

18.04.2010 http://www.skynam.com/telechargement.php


     Winjall_ENU-4.2.1.0.zip
Warning level : Normal

MANDATORY INSTALLATION OF A LATTER V4.0.0.0 VERSION TO ACCESS TO NEW (SECURISED) MACHINES.
The versions from V4.0.0.0 are the only ones to manage the new securised ECUs and securised Tunewares.

*** CONTENT ***

Winjall:
- V4.2.1.0 (new - 12th 04/2010)
Documentations in English:
- Winjall User's Manual: V1.50 (28th 01/2010)
Note:
- This software pack does not content any Tuneware. The Tunewares have to be downloaded and installed apart.

*** NEW FUCTIONS AND IMPROVEMENT ***

1) Same as V4.2.0.0 but correction to redirect to www.skynam.com for dowloading of new versions.
2) Access function to full display maps for computers with small screens.
3) Mandatory installation to benefit from new Commander44 V270, Commander6D V140 and Challenger4 V630 Tunewares.

*** HOW TO INSTALL WINJALL ***

- Download new Winjall .zip file to save it in a directory on your hard disk.
- If you have already install a former Winjall version, you have to usinstall it before installing this new one:
In Windows, execute 'Start\Parameters\Configuration\Add-Sup softwares'. In the software list, select 'Winjall' (end of liste) then 'Uninstall'. Follow uninstall instructions.
- With the explorer, double click on the downloaded Winjall .zip file, then double click on Setup. At the question on files extraction, answer 'Extract All'.
- If the installation does not automatically start: in the new directory created by the extraction, double click on Setup (application).

*** FRIEND ADVICES ***

- It is mandatory to install new versions on your COMPUTER AND IN THE ECUs.
- Set on your bedhead table the new Winjall and ECU software pack documentations, and read one page every evening, it will help to win races (and to have a good night).




 

     Chal4_ENU-6.3.0.0.zip
SECURITY CRITICAL MODIFICATION
Warning level : Maximum

MANDATORY INSTALLATION of a version V6.3.0.0 (with system 610) or latter to securise machines and Tunewares.

*** NEW FUCTIONS AND IMPROVEMENT ***

1) Full resistant to memory lost on alimentation tension drops at the engine start.
2) Improvement of machine internal security and Tunewares security.
3) Error corrected in Winjall on calibrations functions locked when exit from Top Dead Center calibration with cancel button.

*** CONTENT ***
A major improvement of the documentation

Challenger4 Tunewares: critical modification (see explicative)
- Throttle/RPM: V620 with system V610 (new - 26th 06/2009)
- Pressure/RPM and turbo: V630 with system V610 (new - 26th 06/2009)
Challenger4 former Tunewares archives:
- Throttle/RPM: V420-610
- Pressure/RPM and turbo: V300-620
Documentations in English:
- 18 documents, each one deals with a functionnality of the Challenger4, deeply with explicative examples (30th 10/2008)
- Challenger4+ installation: V1.30 - ignition modules management (new - 26th 06/2009)
- Challenger4+ options installation: V1.20 - sequential gearboxes, motorised throttles, air electrovalves, bang-bang, ... (27th 08/2007)
Note:
- Does not content Winjall software. Winjall must first be downloaded and installed apart.
- Does not content the sensors convertion maps nor the actuators command maps. These maps have to be downloaded and installed apart from the pack SensAct.

*** NEEDING ***

Winjall V4.2.1.0: see specific downloading.
- V4.2.1.0 or latter version of Winjall software must mandatory have been installed first.

*** SECURITY CRITICAL MODIFICATION ***

Since system version V610, improvement of machine internal security.
Particularly when tuning, updating and bolting ECUs.
No parasite software or data can be inserted.

*** FUNCTIONMENT CRITICAL MODIFICATION ***

Since system version V500 and so on this new one:
THE TOP DEAD CENTER CALIBRATION IS TO EXECUTE AGAIN
- if change from Hall effect RPM or phase sensor to an inductive one is done, or vice versa.
- if importing tuning from a version fromer than V500 using an Hall effet RPM or phase sensor
For engines equiped with inductive sensors without changing sensor types, no modification.

In fact, on former version than V500, Hall effect and inductive sensors (RPM and phase) read the theet falling edges.
With an Hall effect sensor, the ECU could loose its synchronisation reading these falling edges.
SINCE SYSTEM VERSION V500, The Hall sensors read the teeth rising edges that they see a lot better.
The inductive sensors keep on eading teeth falling edgesthat they see a lot better.
IT RESULTS IN AN IMPORTANT ADVANCE SHIFT with these new Tunewares versions when using Hall effet RPM or phase sensor compared to inductive sensors.
If the Top Dead Center calibration is not executed for each sensor type, THERE REALLY ARE ENGINE BROKEN RISKS.

WARNING:
To avoid engine broken by TDCM calibration forgetting with Hall effect sensors, Winjall does not import Hall sensor type when updating new Tunewares (since V500) with old Tunewares (former than V500).
In this case, sensors stay on inductive type, and the engine will not start at all if it is equipped with one or two Hall sensors.
You then have to execute 'Sensor type' calibration to set by hand the Hall type, and a warning message with a dead head display remembers you that the TDCM calibration is to change.

*** HOW TO INSTALL MACHINE PACKS ***

- Download new Challenger4 .zip file to save it in a directory on your hard disk.
- If you have already installed a former Challenger4 version: In Windows, execute 'Start\Parameters\Configuration\Add-Sup softwares'. In the software list, select 'Challenger4' then 'Uninstall'. Follow uninstall instructions.
- With explorer, double click on the dowloaded Challenger4 .zip file, then double click on Setup. At the question on files extraction, answer 'Extract All'.
- If the installation does not automatically start: in the new directory created by the extraction, double click on Setup (application).

*** FRIEND ADVICES ***

- It is very important to install new versions on your COMPUTER AND IN THE ECUs.
- Set on your bedhead table the new Winjall and ECU software pack documentations, and read one page every evening, it will help to win races (and to have a good night).

[Zeljko]

Winjall calibration software Winjall: V4.3.0.0 (new - 13th 09/2010)
http://www.skynam.com/fichiers/Updates/Winjall_ENU-4.3.0.0.zip

Winjall is the software to be used to tune all our ECUs.
It runs on PC compatible computer, under the Microsoft Corporation operating systems Windows© 2000, XP, Vista, 7.

WARNING LEVEL : Important

THIS VERSION IMPROVES THE SECURITY OF CAN-BUS TRANSMISSIONS.

CONTENT

Winjall: V4.3.0.0 (new - 13th 09/2010)
Documentations in English: Winjall User's Manual: V1.50 (28th 01/2010)

Nota: Does not content any Tuneware. The Tunewares have to be downloaded and installed apart.

NEW FUCTIONS AND IMPROVEMENT

1) Better fault tolerance with CAN-bus sensors WinjNet (including Lambda controller DigiLSU)
2) Improvement of maps header display.

Button to launch the downloads

HOW TO INSTALL WINJALL

• Download new Winjall .zip file to save it in a directory on your hard disk.
• If you have already install a former Winjall version, you have to usinstall it before installing this new one:
In Windows, execute 'Start/Parameters/Configuration/Add-Sup softwares'. In the software list, select 'Winjall' (end of liste) then 'Uninstall'. Follow uninstall instructions.
• With the explorer, double click on the downloaded Winjall .zip file, then double click on Setup. At the question on files extraction, answer 'Extract All'.
• If the installation does not automatically start: in the new directory created by the extraction, double click on Setup (application).

FRIEND ADVICES

• It is mandatory to install new versions on the PC AND IN THE ECUs.
• Set on your bedhead table the new Winjall and ECU software pack documentations, and read one page every evening, it will help to win races (and to have a good night).





Sensors and Actuators  SensAct_ENU-1.0.1.0.zip
http://www.skynam.com/fichiers/Updates/SensAct_ENU-1.0.1.0.zip

 
SENSORS CONVERSION MAPS AND ACTUATORS COMMAND MAPS

This software pack contents the sensors conversion maps and the actuators command maps like motorized throttles, gasoline injectors corrections, ...
It is mandatory to install it to select the type of sensor and actuators that are equiping the ECUs, because these maps are no longer integrated in the ECUs software packs.

WARNING LEVEL : Normal

CONTENT
• Sensors convertion maps (new - 13th 09/2010)
• Actuators command maps (new - 13th 09/2010)

NEEDING Winjall V4.3.0.0 (see specific downloading)

V4.3.0.0 or latter version of Winjall software must mandatory have been installed first.

HOW TO UPGRADE TUNEWARES

• Download new .zip SensAct software pack file to save it in a directory on your hard disk.
• If you have already install a former version of this pack, you have to usinstall it before installing this new one:
In Windows, execute 'Start/Parameters/Configuration/Add-Sup softwares'. In the software list, select SensAct then 'Uninstall'. Follow uninstall instructions.
• With the explorer, double click on the downloaded software pack .zip file, then double click on Setup. At the question on files extraction, answer 'Extract All'.
• If the installation does not automatically start: in the new directory created by the extraction, double click on Setup (application).



CHALLENGER4 ECU SOFTWARE
http://www.skynam.com/fichiers/Updates/Chal4_ENU-6.3.0.0.zip

WARNING LEVEL: Maximum

MANDATORY INSTALLATION of a version at least V6.3.0.0 (with system 610) to securise machines and Tunewares.

NEW FUNCTIONS AND IMPROVEMENTS

1) Full resistant to memory lost on alimentation tension drops at the engine start.
2) Improvement of machine internal security and Tunewares security.
3) Error corrected in Winjall on calibrations functions locked when exit from Top Dead Center calibration with cancel button.

CONTENT
Challenger4 Tunewares:
• System V610
• Throttle/RPM: V620 with system V610 (new - 26th 06/2009)
• Pressure/RPM and turbo: V630 with system V610 (new - 26th 06/2009)
• Archives of all the former Tunewares to open the not yet updated machines of this type

Documentations in English:
• Challenger4 tuning software pack: 18 documents, each one deals with a functionnality of the Challenger4, deeply with explicative examples (30th 10/2008)
• Challenger4+ installation: V1.30 - ignition modules management (new - 26th 06/2009)
• Challenger4+ options installation: V1.20 - sequential gearboxes, motorised throttles, air electrovalves, bang-bang, ... (27th 08/2007)

Nota:
• Does not content Winjall software. Winjall must first be downloaded and installed apart.
• Does not content the sensors convertion maps nor the actuators command maps. These maps have to be downloaded and installed apart from the pack SensAct.

 

SECURITY CRITICAL MODIFICATION

Since system version V300, improvement of machine internal security.
Particularly when tuning, updating and bolting ECUs.
No parasite software or data can be inserted.

FUNCTIONNEMENT CRITICAL MODIFICATION

Since system version V500 and so on this new one:
It is mandatory to execute again the Top Dead Center Mark calibration
• on changing from Hall effect RPM or phase sensor to an inductive one, or vice versa.
• on importing a tuning from a version older than V500 using an Hall effet RPM or phase sensor
To avoid engine destruction if the recalibration of the TDCM has been forgotten when using a Hall sensor, Winjall does not import Hall sensor type when updating new Tunewares (since V500) with old Tunewares (former than V500).
In this case, sensors stay on inductive type, and the engine will not start if it owns one or two Hall effect sensors.

See detailed explanation

NEEDING Winjall V4.2.1.0 (see specific downloading)

V4.2.1.0 or latter version of Winjall software must mandatory have been installed first.

HOW TO UPGRADE TUNEWARES
• Download new .zip Challenger4 software pack file to save it in a directory on your hard disk.
• If you have already install a former version of this pack, you have to usinstall it before installing this new one:
In Windows, execute 'Start/Parameters/Configuration/Add-Sup softwares'. In the software list, select Challenger4 then 'Uninstall'. Follow uninstall instructions.
• With the explorer, double click on the downloaded software pack .zip file, then double click on Setup. At the question on files extraction, answer 'Extract All'.
• If the installation does not automatically start: in the new directory created by the extraction, double click on Setup (application).

[Zeljko]

http://www.skynam.com/cms.php?id_cms=1000

WARNING LEVEL : Important

THIS VERSION CONTAINS THE SECURITY IMPROVEMENT OF CAN-BUS TRANSMISSIONS.

CONTENT
Winjall: V4.4.0.0 (new - 22nd 11/2010)
Documentations in English: Winjall User's Manual: V1.60 (new - 22nd 11/2010)

NEW FUCTIONS AND IMPROVEMENT
1) For professionnal licenses, allows taking possession of a machine already possessed by another professionnal, but with loss of all settings (the settings remain confidential).
2) Improved diagnostic of defects.
3) Closure of used Tuneware in case of change of ECU without closing Winjall: avoids risk to send the tuning from the first one to the second one.

[Zeljko]

V 4.5.0.0

1) Accepts the self learning functions of the ECUs.
2) Simplification of Tuneware loading and saving procedure.